1.  Application

a.  Initial treatment;  Follow basic procedure as described in Tier 2000 Series #2210, Initial Micro-etch procedures.  Carpet will not be affected by dilute cleaner therefore normal precaution to keep product off carpeted areas are satisfactory.  Use product sparingly to border of carpet.  Mop lengthwise along border, then squeegee away from carpet before extraction.

b.  Dry mop residue from floor and thoroughly rinse mop and bucket with clean water.  Fill bucket with clear water and mop on water and dry mop several times (changing mop water after each sequence).  Mopping is not necessary where floor drains exist.  Simply hose residue into drains with a pressure nozzle, brush with a push broom and repeat process until floor produces no more "cloudiness" in water.  Broom between all rinses.  After final rinse, squeegee all water into drains.